Lecture Notes in Mechanical Engineering

The Optics Between Theory and Application in Arabic Golden Age.- Fatigue and Notch Mechanics.- Experimental Disparity Analysis of the Behavior and Fatigue of the 304L Stainless Steel.- Numerical Investigation on the Anisotropic Behavior of an Aluminum Alloy Type 2017A.-History of Microstructure Evolution and its Effect on the Mechanical Behavior During Friction Welding for AISI 316.- A Study of Selective Laser Melting Technology on the Ultra-High StrengthTool Steel Use - Quality, Mechanical Properties and Fatigue.- Transferability of Fracture Toughness With Constraint.- Crack Path Stabilisation and T-Stress Estimation in Connection With the Global Approach for Inclined Notches.- Measuring of Strain and Displacements in Welded Joints Subjected toTensile Load Using Stereometric Methods.- Experimental and Numerical Investigations of Friction Stir Welding of Aluminum to Copper.- Heat-Affected Zone as Critical Location in Pressure Equipment.-Mixed Mode Static and Dynamic Modeling in Fracture Mechanics for Plane Composite Materials by X-FEM.-The Preheating Temperature Effects on the Residual Stresses of the Welded Rails Sections.- Dynamic Analysis of Fiber Reinforced Composite Beam Containing a Transverse Crack.-Determination of Elastic-Plastic Parameters of Inconel Arc Sprayed Coating.-Study of Noise Inside a Mechanical Shovel Cabin Using a Sound Perception Approach.- Perceptual Study of Simple and Combined Gear Defects.- Natural Frequencies of Composite Cylindrical Helical Springs.- Improvement of the Sensitivity of the Scalar Indicators Using a Denoising Method by Wavelet Transform.- Fault Diagnosis Through the Application of Cyclostationarity to Signals Measured.- Experimental Study of Real Gear Transmission Defects Using Sound Perception.- Taguchi Design of Experiments for Optimization and Modeling of Surface Roughness when Dry Turning X210Cr12 Steel.- Study Contribution of Surface Quality Parts Machined by Turning Using Hard Materials.- Prediction of Cutting Tool's Optimal Lifespan Based on the Scalar Indicators and the Wavelet Multi-Resolution Analysis.- Diffusion Modelling of Composite With Permeable Fiber.-Elastic Buckling at the Scale of a Bone Trabecula: The Influence of the Boundary Conditions.- Dynamic Characterization of MR Damper and Experimental Adjustment of Numerical Model.- Evaluation of Nonlinear Seismic Response of Reinforced Concrete Structures.-A Finite Element Approach for Predicting the Flexural Response of Light Weight FRP-Concrete Beams Under Cyclic Loading.- Study of Composite With Metallic Matrix WC/W2C-20W-20Ni Realized by Spontaneous Infiltration of the Bronze Alloy Cu-30Mn-3P.-Investigations on the Residual Shear Properties of a Composite Subjected to Impact Fatigue Loading.- Development of a Reliability-Mechanical: Numerical Model of Mechanical Behavior of a Multilayer Composite Plate.- Analysis of Deflection in Isotropic and Orthotropic Rectangular Plates with Central Opening under Transverse Static Loading.- Diffusive Behavior in Polymer-Local Organomodified Clay Matrix.-Effect of Grain Size of Nano Composite in Optical and Magnetic Proprieties.- Finite Element Based on Layerwise Approach for Static and Dynamic Analysis of Multi-Layered Sandwich Plates.- Tool Life Evaluation of Cutting Materials in Turning of X20Cr13 StainlessSteel.- Importance of Physical Modeling for Simulations of Turbulent ReactiveFlows.- Influence of Diverging Section Length on the Supersonic Jet Delivered From Micro-Nozzle: Application to Cold Spray Coating Process.- Turbulent Combustion Modeling in Compression Ignition Engines.- On the Thermal Characterization of a Fire Induced Smoke-Layer in Semi-Confined Compartments.