Preface.
Acknowledgments.
FRICTION STIR WELDING AND PROCESSING.
Texture Evolution during Friction Stir Welding of Stainless Steel (Jaehyung Cho).
Texture Development in Aluminum Friction Stir Welds (Richard W. Fonda, Keith E. Knipling, John F. Bingert, Anthony P. Reynolds, Wei Tang, Kevin J. Colligan, and John A. Wert).
Microstructural Studies of a Friction-Stir-Welded AA5052 (N. T. Kumbhar, Santosh. K. Sahoo, R. Tewari, G. K. Dey, I. Samajdar, and K. Bhanumurthy).
Effect of Microstructure on Mechanical Properties of Friction-Welded Joints between Aluminum Alloys (6061, 5052) and 304 Stainless Steel (N. T. Kumbhar, A. Laik, G. K. Dey, K. Bhanumurthy, J. Krishnan, D. J. Derose, R. L. Suthar, S. K. Sahoo, and I. Samajdar).
Effect of Texture on Fracture Limit Strain in Friction Stir Processed AZ31F3Mg Alloy (Yutaka S. Sato, Akihiro Sugimoto, Hiroyuki Kokawa, and Chang-Woo Lee).
Microstructure and Texture Analysis of Friction Stir Welds of Copper (T. Saukkonen., K. Savolainen, J. Mononen, and H. H??nninen).
TEXTURE AND ANISOTROPY IN STEELS.
The Effects of Texture on the Corrosion Resistance of SS304 Stainless Steel (M. Azzi and J. A. Szpunar).
Microstructural Characterization of Dual Phase Steels by Means of Electron Microscopy (Liesbeth Barb?? and Kim Verbeken).
Grain Size Effect on the Tensile Behavior of a FeMnC TWIP Steel in Relation with the Microstructure and Texture Evolutions (David Barbier, Nathalie Gey, Alain S??bastien, and Michel Humbert).
Combination of Two X-Ray Diffraction Settings for Determining the Texture of Small Sheared Samples (D. Barbier, B. Bolle, J. J. Fundenberger, C. Laruelle, and A. Tidu).
Texture of Non-Oriented Rolled Steels by X-Ray and Electron Diffraction (Martin Cernik, Milos Predmersky, Andrej Lesko, and Erik Hilinski).
Effect of Coating Texture on Powdering Behavior of Industrially Produced Galvannealed Coating on IF, IFHS and HSQ Grade Steels (A. Chakraborty, R.K. Ray, and D. Bhattacharjee).
Including Elastical Anisotropy Due to Texture in a Finite Element Model for the Prediction of Residual Stresses in Welds (Koen Decroos, Carsten Ohms, and Yvan Houbaert).
Texture and Microstructure Evolution in a Fe-Si CGO Sheet during the Processing Route before Secondary Recrystallization (Francisco Cruz-Gandarilla, Richard Penelle, Thierry Baudin, Hector Mendoza Leon, and J. G. Cabanas-Moreno).
TEM Study of the Inhibition Layer of Commercial Hot-Dip Galvanized Steels (Jack Elia, E. Petit, J -S Lecomte, B. Gay, and V. Pitchon).
Measurement of the Texture Sharpness in Grain-Oriented Electrical Steels (M. Frommert, C. Zobrist, D. Raabe, S. Zaefferer, and L. Lahn, A. B??ttcher).
Effects of Composition and Coiling Temperature on Precipitation and Texture Formation in a Few Interstitial Free High Strength Steels (Pampa Ghosh and R K Ray).
Microstructure and Texture Development in Warm Rolled High Strength IF Steels Containing Cu, P and B (Arunansu Haldar and Chiradeep Ghosh).
Effect of Tin on the Texture of Nonoriented Electrical Steels (Chun-Kan Hou, Tong- Han Lee, and Chun-Chih Liao).
Effect of Cold Rolled Reduction on the Texture and Plastic Strain Ratio of 2205 Duplex Stainless Steel (Chun-Kan Hou and Chang-Chia Liu).
Importance of Dislocation Substructures in Texture Control of Low Carbon Steel (Hirosuke Inagaki).
Texture Control in Manufacturing Current and Future Grades of Low-Carbon Steel Sheet (Leo A.I. Kestens and Roumen Petrov).
Relative Preference for Strain Localizations in Ultra Low Carbon Steel (R. Khatirkar, L.A.I. Kestens, R. Petrov, and I. Samajdar).
Influence of Texture on Surface-Roughening during Press Forming in Ti Added High Purity Ferritic Stainless Steel Sheets (Ken Kimura, Masaharu Hatano, and Akihiko Takahashi).
Effect of Tin on the Recrystallization Behavior and Texture of Grain Oriented Electrical Steels (Chun-Chih Liao, Chun-Kan Hou).
EBSD Investigation of Phase Transformation in Low Carbon Steels (Sophie Lubin, Anne-Fran??oise Gourgues-Lorenzon, H??l??ne Regle, Frank Montheillet, and Brigitte Bacroix).
A Monte-Carlo Algorithm for the Zener Drag Effect in the Fe-3%Si Magnetic Alloys (N. Maazi, R. Penelle, A. L. Etter, and T. Baudin).
Effect of Strain and Strain Path on Deformation Twinning and Strain Induced Martensite in AISI 316L and 304L Austenitic Stainless Steel (S. K. Mishra, P. Pant, K. Narasimhan and I. Samajdar).
Analysis of the Formation and Growth of Recrystallizing Grains in IF Steels by In-Situ EBSP (H. Nakamichi and F. J. Humphreys).
Stability of Secondary Recrystallization in Grain-Oriented Silicon Steel (Eiichi Namba, Satoshi Arai, Hotaka Homma, and Yoshiyuki Ushigami).
A Practical Investigation into Identifying and Differentiating Phases in Steel using Electron Backscatter Diffraction (Matthew M. Nowell, Stuart I. Wright, and John O. Carpenter).
Influence of Precipitate Distribution on Normal Grain Growth Simulation at the Beginning of the Secondary Recrystallization Annealing in a Fe-3%Si Electrical Steel HiB - Role of the MnS and AIN Precipitates (C. Sekkak, N. Rouag, and R. Penelle).
Microstructure and Texture Development during Cold Ring Rolling of 100Cr6 (K. Ryttberg, M. Knutson Wedel, L. Nyborg, and P. Dahlman).
Development of Texture, Microstructure and Grain Boundary Character Distribution after Heavy Cold Rolling and Annealing in a Boron Added Interstitial Free (IF) Steel (Rajib Sana and R. K. Ray).
Texture of Nb-Containing Ferritic Stainless Steel after Secondary Recrystallization (Rodrigo P. Siqueira, Hugo R. Z. Sandim, and Tarcisio R. Oliveira).
Quantitative Prediction of Transformation Texture in Hot-Rolled Steel Sheets by Multiple KS Relation (Toshiro Tomida, Masayuki Wakita, Mitsuru Yoshida, and Norio Imai).
Crystallographic Characterization of a Phosphorus Added TRIP Steel (Kim Verbeken, Liesbeth Barb??, and Dierk Raabe).
Microstructural and Textural Evolutions in a Cold Rolled High Mn TWIP Steel (Kim Verbeken, Lieven Bracke, Leo Kestens, and Jan Penning).
Stored Energy Evolution in a Cold-Rolled IF Steel (A. Wauthier, B. Bacroix, T. Chauveau, O. Castelnau, and H. R??gl??).
A Comparison of Texture Measurements Via EBSD and X-RAY (Stuart I. Wright and Matthew M. Nowell).
The Measurement Approach of X-Ray Residual Stress in Fe-Ni Alloy with Different Textures (Qiulin Wu, Xiaojun Hu, Zuming Fu, Haiyan Zhao, Bing Zhang, Yong Wang, Wei Fang, and Limin Li).
Influence of Grain Orientation on Magnetic Aging Behavior of a Non-Oriented Silicon Steel Sheet (L. Xu, W. Mao, P. Yang, and H. Feng).
EFFECTS OF MAGNETIC FIELDS.
Eutectoid Point Shift and Orientation Relationships between Ferrite and Cementite in Pearlite in a High Magnetic Field (Y. D. Zhang, C. Esling, H. Klein, X. Zhao, and L. Zuo).
Characteristics of Recrystallization Texture of Cold-Rolled IF Steel Sheet Annealed with a Magnetic Field in the Transverse Direction (Yan Wu , Changshu He, Yudong Zhang, Xiang Zhao, Liang Zuo, and Claude Esling).
Crystallographic Features during Martensitic Transformation in Ni-Mn-Ga Ferromagnetic Shape Memory Alloys (D. Y. Cong, Y. D. Zhang, C. Esling, Y. D. Wang, X. Zhao, and L. Zuo).
Grain Boundary Misorientation and CSL in Magnetically Annealed Fe-0.75%Si (C.M.B. Bacaltchuk, G.A. Castello-Branco, and H. Garmestani).
The Effect of Ultra-High Magnetic Fields on Grain Growth and Recrystallization in Metals (A.D. Sheikh-Ali and H. Garmestani).
New Approach to Texturing and Grain Boundary Engineering by Magnetic Field Application (Tadao Watanabe, Sadahiro Tsurekawa, Yudong Zhang, Xiang Zhao, Liang Zuo, and Claude Esling).
Effects of Magnetic Field Direction on Texture Evolution in a Cold-Rolled IF Steel Sheet during High Magnetic Field Annealing (Yan Wu, Changshu He, Xiang Zhao, and Liang Zuo).
HEXAGONAL METALS.
Electrochemical Behavior of (001), (100) and (110) Ti Single Crystals under Simulated Body Fluid Condition (M. Azzi, S. Faghihi, M. Tabrizian, and J. A. Szpunar).
Identification and Rationalization of Secondary Twin Variants in a Magnesium Alloy (M. R. Barnett and P. Cizek).
Textures in HCP Titanium and Zirconium: Influence of Twinning (Nathalie Bozzolo and Francis Wagner).
Texture and Microstructure Evolution during Asymmetric Rolling of Mg Alloys (Jaehyung Cho, Hyung-Wuk Kim, and Suk-Bong Kang).
Prediction of Anisotropic Properties in Mg Alloy Sheets Using the Crystal Plasticity Finite Element Method (S.-H. Choi, J.K. Choi, H.W. Lee, and D.H. Kim).
Strain Hardening Behaviour of an Initially Textured TI6AL4V Titanium Alloy as a Function of Strain Rate and Compression Direction (Frederik Coghe, Luc Rabet, and Paul Van Houtte).
Texture Evolution during the Static Recrystallization of Three Binary Mg-Y Alloys (R. Cottam, J. Robson, G. Lorimer, and B. Davis).
Grain Size and Orientation Distribution Function of High Purity ??-Titanium (Bradley S. Fromm, Brent L. Adams, Sadegh Ahmadi, and Marko Knezevic).
Textures in Titanium Alloys - An Industrial Perspective on Deformation, Transformation and Properties (David Rugg, David Furrer, and Nigel Brewitt).
Annealing Related Microstructural Developments in a Two-Phase ZR-2.5 Nb Alloy (V.D. Hiwarkar, S.K. Sahoo, I. Samajdar, K. Narasimhan, ??. V. Mani krishna, G.K. Dey, D. Srivastav, R. Tiwari, and S. Banarjee).
Texture Aspects of Delayed Hydride Cracking in Products from Zr-Based Alloys (Margarita Isaenkova and Yuriy Perlovich).
Effect of Twinning on the Strain Hardening Behaviors of Two Mg Alloys Deformed Along Four Different Strain Paths (L. Jiang and J.J. Jonas).
EBSD Study of Annealing Rolled Zirconium (L. Jiang, M.T. P??rez-Prad, O.A. Ruan, and M.E. Kassner).
Texture Evolution during Multi-Pass Equal Channel Angular Extrusion of Beryllium (Saiyi Li, David J. Alexander, Irene J. Beyerlein, and Donald W. Brown).
A Mechanism of Determining the Formability of AZ31 near Room Temperature (Hualong Li, Emilie Hsu, and Jerzy Szpunar).
An EBSD Study of the Misorientations Related to Dynamic Recrystallization in Mg AM30 Deformed At High Temperatures (Etienne Martin, St??phane Godet, Lan Jiang, Abdelbaset Elwazri, Pascal J. Jacques, and John J. Jonas).
Texture Evolution in Boron Modified Ti-6AI-4V Alloy (Shibayan Roy, Nilesh Gurao, Satyam Suwas, S. Tamirisakandala, R. Srinivasan, and D.B. Miracle).
Heterogeneous Deformation in Single-Phase Zircaloy 2 (S. K. Sahoo, V. D. Hiwarkar, I. Samajdar, P. Pant, D. Srivastav, R. Tewari, G. K. Dey and S. Banerjee).
Texture of Magnesium Alloy Sheets Heavily Rolled by High Speed Warm Rolling (Tetsuo Sakai, Satoshi Minamiguchi, Hiroaki Koh, and Hiroshi Utsunomiya).
Microstructure and Texture Gradient in Titanium Severely Strained by Friction Roll Processing and Subsequent Annealing (Meiqin Shi, Tomohiro Umetsu, Yoshimasa Takayama, Hajime Kato, and Hideo Watanabe).
Evolution of Transformation Texture in a Metastable ??-Titanium Alloy (Satyam Suwas, Nilesh P. Gurao, Ashkar Ali).
Dislocations in Textured Mg-4.5%AI-1 %Zn Alloy: TEM and Statistical Studies (V.N. Timofeev, V.N. Serebryany, and Yu A. Zaliznyak).
Microstructure and Micro-Texture Evolution of Compression Twins in Magnesium (P. Yang, L. Meng, X. Li, W. Mao, and L. Chen).
TEXTURE IN MATERIALS DESIGN.
Accessing the Texture Hull and Properties Closure by Rotation and Lamination: Results in the Primitive Basis of Dilation Functions (Brent L. Adams and David T. Fullwood).
Correlation Relationship between Yield Strength and the Elastic Compliance for the Polycrystalline Nickel 201 (Sadegh Ahmadi, Brent L. Adams, David T. Fullwood, and Bradley S. Fromm).
Modeling Rolling Texture of Twinned Cu Single Crystals (Khaled Al-Fadhalah, Armand Beaudoin, and Marek Niewczas).
Multiscale Modeling of Equal Channel Angular Extruded Aluminum with Strain Gradient Crystal Plasticity and Phenomenological Models (L. Duch??ne, M.G.D. Geers, W.A.M. Brekelmans, E. Chen, B. Verlinden, and A.M. Habraken).
Effect of Deformation Constraints on the Texture Formation in Al-5mass%Mg Solid Solution at High Temperatures (Kazuto Okayasu, Masayuki Sakakibara, and Hiroshi Fukutomi).
Spectral Methods in the Statistical Description and Design of Microstructure (D.T. Fullwood, B.L. Adams, K.A. Stevens, S.R. Niezgoda, and S.R. Kalidindi).
A Comparison of Deformation Textures and Mechanical Properties Predicted by Different Crystal Plasticity Codes (Craig S. Hartley, Paul R. Dawson, Donald E. Boyce, Surya R. Kalidindi, Marko Knezevic, Carlos Tom??, Ricardo Lebensohn, S. Lee Semiatin, Todd J. Turner, and Ayman A. Salem).
Simulation of Texture Development in Pure Aluminum Deformed by Equal Channel Angular Pressing (Majid Hoseini, Mahmood Meratian, Hualong Li, and Jerzy Szpunar).
Plastic Heterogeneity Due to Grain Boundaries and Its Influence on Global Deformation Textures (Anand??K Kanjarla, Paul Van Houtte, and Laurent Delannay).
On the Correlation of Surface Texture and Strain Induced Surface Roughness in AA6XXX Aluminum Sheet (S. K??sters, M. Seefeldt, and P. Van Houtte).
The Variation Range for the Results of FCC Texture Simulations Based on {111}110 Slip (Torben Letters).
Development of Low Magnetism and Strongly Cube-Textured Composite Ni-7%W/Ni-10%W Substrate for Coated Superconductor (Dan-min Liu, Fei Hao, Jiu-xing Zhang, Yan-cao Hu, Mei-ling Zhou, and Wei-peng Liu).
Two-Point Orientation Coherence Functions: An Orthonormal Series Solution (Peter R. Morris).
The Influence of Shear Bands on Microtexture Evolution in Polycrystalline Copper (H. Paul and J.H. Driver).
Influence of Dislocation Stress on the Corrosion Behavior of (111) and (123) Surface Plane of Aluminum Single Crystal (Dashi Pei, Weimin Mao, and Huiping Feng).
Texture Randomization by Intense Shearing in Layered AI and AI (0.3%Sc) ARB-Processed Sheet (M.Z. Quadir, O. Al-Buhamad, L. Bassman, and M. Ferry).
Texture Development of Molybdenum Sheets during Last Step of Heat Treatment (C.-G. Oerrel, I. H??nsche, W. Skrotzki, A. Lorich, and W. Knabl).
Solute, Superplasticity and Texture Change in Aluminium Alloys (K. Sotoudeh, P.S. Bate, and F.J. Humphreys).
Texture-Based Plastic Potentials in Stress Space (Albert Van Bael, Sampath K. Yerra, Paul Van Houtte, and Albert Van Bael).
Hierarchical Multi-Level Modelling of Plastic Anisotropy using Convex Plastic Potentials (Paul Van Houtte, Sampath K. Yerra, and Albert Van Bael).
Author Index.
