Nuclear and Environmental Technology Applications in the Ceramic Industry.
Indoor Air Pollution Control: Formaldehyde Adsorption by Synthesized Zeolite Rich Materials (M. Del Carmen Cazorla A. and M. Grutzeck).
Molybdenum-Oxide Based Sorbents for Toxic Metals (M. Chehbouni and A.W. Apblett).
Recovery of Palladium Via a Vitrification Process (D.K. Peeler, A.D. Cozzi, R.F. Schumacher, I.A. Reamer, and R.J. Workman).
Legal and Environmental Health and Safety Issues Facing Artists and Ceramic Engineers (J. Taylor)
Nuclear Waste Forms and Fuels Processing and Technology - Ceramic Forms.
Computational and Experimental Studies of the Radiation Response of Gd2Ti2O7 Pyrochlore (R. Devanathan and W.J. Weber).
Hollandite-Rich Ceramics for the Immobilization of Cs (M.L. Carter).
General Recipe and Properties of a Four Inch Hydroceramic Waste Form (Y. Bao and M.W. Grutzeck).
Feasibility of Immobilizing Tank Wastes in Geopolymers (E.R. Vance, D.S. Perera and Z. Aly).
Processing and Characterization of Fluorite-Related Ceramic Wasteforms for Immobilization of Actinides (M.C. Stennett, N.C. Hyatt, W.E. Lee, and E.R. Maddrell).
Immobilization of Cs and Sr in Geopolymers With Si/Al ~ 2 (D.S. Perera, E.R. Vance, Z. Aly, J. Davis and C.L. Nicholson).
Nuclear Waste Forms Processing and Technology - Steam Reforming.
Steam Reforming Technology for Denitration and Immobilization of DOE Tank Wastes (M. Cowen, J.B. Mason, K. Ryan, and D. Schmoker).
Feed Reactivity Study for Fluidized Bed Steam Reformer (FBSR) Processing (T. Lorier, C. Jantzen, J. Marra, and J. Pareizs).
Durability Testing of Fluidized Bed Steam Reforming (FBSR) Products (C.M. Jantzen, J.M. Pareizs, T.H. Lorier, and J.C. Marra).
Panel Discussion on Nuclear Waste Form Durability Testing and Disposal Status.
The Product Consistency Test (ASTM C1285) for Wasteform Durability Testing (C.M. Jantzen and N.E. Bibler).
Leaching Properties for Qualification of Non-Vitreous Waste Forms (E.R. Vance).
Nuclear Waste Forms and Fuels Processing and Technology - Glass Forms.
Induction Heated Cold Crucible Melter Testing with Troublesome High Level Waste Components (A.P. Kobelev, S.V. Stefanovsky, O.A. Knyazev, T.N. Lashchenova, J.C. Marra, E.W. Holtzscheiter, and C.C. Herman).
DWPF Melter Glass Pump Implementation and Design Improvement (M.E. Smith, A.B. Barnes, D.F. Bickford, and D.C. Iverson).
Modeling Melt Rate for DWPF: A Preliminary Assessment (A.S. Choi, D.K. Peeler, and T.B. Edwards).
Advances In Nuclear Waste Form Testing and Characterization Methods.
Characterization of Alteration Phases on HLW Glasses After 15 Years of PCT Leaching (I.S. Muller, S. Ribet, I.L. Pegg, S. Gin and P. Frugier).
Glass Durability Correlations Interpreted Through the Electronegativity and Basicity of Network Formers (J. Reynolds).
Revisiting the So4 Limit for the Defense Waste Processing Facility (D.K. Peeler, C.C. Herman, T.B. Edwards, M.E. Smith, and D.R. Best).
Effects of Aging and Temperature on the Rheological Properties of Simulated Melter Feed Slurries for Nuclear Waste Vitrification (H. Zhao, I.S. Muller, and I.L. Pegg).
Iron Covalency Assumptions and Redox Equilibrium in Vitrification (J. Reynolds).
Preliminary Control Strategy for Hanford Low-Activity Waste Glass Formulation (J.D. Vienna, G.F. Piepel, C.A. Musick, I.S. Muller and I.L. Pegg).