+612 9045 4394
$7.95 Delivery per order to Australia and New Zealand
100% Australian owned
Over a hundred thousand in-stock titles ready to ship
AMST'99 - Advanced Manufacturing Systems and Technology : Proceedings of the 5th International Conference : CISM International Centre for Mechanical Sciences - Elso Kuljanic

AMST'99 - Advanced Manufacturing Systems and Technology : Proceedings of the 5th International Conference

CISM International Centre for Mechanical Sciences

By: Elso Kuljanic (Editor)

Paperback ISBN: 9783211831489
Number Of Pages: 906

Share This Book:


or 4 easy payments of $55.19 with Learn more
Ships in 10 to 15 business days

Earn 441 Qantas Points
on this Book

The Fifth International Conference on Advanced Manufacturing Systems and Technology - AMST '99 - aims at presenting up-to-date information on the latest developments research results and industrial experience in the field of machining of conventional and advanced materials, high speed machining, forming, modeling, nonconventional machining processes, new tool materials and tool systems, rapid prototyping, life cycle of products and quality assurance, thus providing an international forum for a beneficial exchange of ideas, and furthering a favourable cooperation between research and industry.

20th Century Evolution of Basic Machining Technology - an Interpretive Reviewp. 1
Machining the Present and the Futurep. 11
Machinery and Systems: a Competitive an Sustainable "High-Tech" Mechatronic Product for Europe. The Role of Researchp. 25
Product Development Must Consider Environmental Aspectsp. 39
Recent Developments in the Design and Control of Cold Forming Processesp. 53
Evaluation of Fully Parallel and Hybrid Kinematics for Advanced Manufacturing Systemsp. 65
The Concurrent Ecodesign Methodologies Eco Sustainable Technologies for Product and Processesp. 81
Dynamic Analysis of Production Processes by Planned Experimentsp. 97
Hard Turning with PCBN Toolingp. 107
Manufacturing of Magnesium Parts - Machining and Formingp. 117
High-Speed Continuos and Discontinuos Machining of Hardened Steel and Hard Cast Iron Using Submicrometer Ceramics on the Basis of A1203p. 125
Influence of the Grinding Process on the Process Behaviour of Cutting Toolsp. 137
Chip Formation in Orthogonal Cutting FEM Simulations and Experimental Evidencep. 145
Performances of Three Layered Ceramic Composites Inserts for Steel Cuttingp. 155
Minor Cutting Edge Wear in Finish Turning Operationsp. 163
Effect of Microstructure in Ultraprecision Machining of Copper Beryllium Alloysp. 171
Ductile Regime Machining of Metal Matrix Compositesp. 179
Vibration Monitoring and Classification in Centerless Grindingp. 187
Grind-Hardening Modeling with the Use of Neural Networksp. 197
High Performance Gears Hobbingp. 207
Automatic Part Geometry and Material Removal Recognition to Optimize the Cutting Conditions along Tool Paths in NC-Millingp. 215
An Integrated Model for Cutting Parameters Optimization and Shop-Floor Schedulingp. 223
A New CAM/CNC Interface for High Speed Millingp. 231
CAPP Software for Tool Selection, Optimization and Tool Life Data Base Adaptation in Turningp. 241
Time Weighted Petri Nets for Optimization of a Refrigerator Manufacturing Plantp. 249
Economic Design of Control Charts Considering the Influence of the Tool Wearp. 257
Optimization of Turning Tool Geometry by Nonlinear Programmingp. 265
Classification of Features Considering their Machinability and Factory Facilities for Computer Aided Process Planningp. 273
Use of Manufacturing Features for Computer Aided Process Planning and Manufacturing System Design. Application to Furnitures Parts of Solid Woodp. 281
A Multiple-Criteria Scheduling Method for Planning of Continuous Manufacturing Processes: a Food Industry Case Studyp. 289
Automatic Extraction of Manufacturing Features from CAD Models for Capp: a Simple and Logical Approachp. 301
A Virtual Lathe for Part Program Verificationp. 309
A Selection Method of Process Plans Set for Part Types Mix Productionp. 315
Hot Workability Studies of Nimonic 80A Applied to the Net-Shape Forging of Aerofoil Bladesp. 323
Influence of Extrusion Processing Variables on the Microstructure and Mechanical Properties of Aluminum-Lithium Alloy Extrusionsp. 329
Comparison of Measured and Computed Contact Pressure Distribution in Cold Sheet Rolling Processp. 337
Optimal DIE Design for Cold Extrusion Processesp. 345
Effectiveness of Numerical Simulation in Avoiding Defects in Hot Extrusion Forging Productsp. 353
Validation of Predictive Approaches for Ductile Fracture in Cold Extrusionp. 361
Development of a Design Procedure for Bending Operationsp. 369
Rubber Forming Processes of Thin Sheetsp. 377
The Use of Artificial Intelligence Techniques to Optimise and Control Injection Moulding Processesp. 385
Hardness Tests on Damaged Metalsp. 393
Analysis of the Tool Loading During Forward Steel Extrusionp. 401
Improving Steel Formability by Cyclic Heat Treatingp. 411
Influence of Microstructural Factors on Fatigue Behaviour in HSLA Steel Laminatesp. 417
Increased Efficiency Resulting from a Detailed Analysis of the Interface Between Forging and Manufacturingp. 427
An Intelligent System for the Determination of the Required Setups and the Associated Clamping Points and Clamping Devices in Millingp. 437
Stabilization of a Milling Machine Against Chatterp. 445
Automation of a Production Line for Flashless Precision Forgingp. 453
Study of A Decision Support Tool for the Automatic Configuration of a Modular Plantp. 461
Management of Instant Processes in the Shopfloorp. 469
From Functional to Cellular Manufacturing Systems: Evaluating of Attractivenessp. 477
Possibilistic Programming and Gas for Aggregate Production Planning under Vague Informationp. 485
Cost/Benefit Analysis of Implementation of Total Quality Program in Manufacturingp. 493
Managing the Buyer-Supplier Interactions the Boundaries of Cooperationp. 499
High-Accuracy Postprocessor for Milling Machinesp. 507
Uncertainity and Information in Cell Formation Problemsp. 515
A Neural Network Approach in Cellular Manufacturingp. 521
New Mechanisms and New Technologies for the Machine Toolsp. 529
Integrated Information System for Order Planning, Control and Cost Estimation in Laser Job Shopsp. 537
An Approach to Selective Laser Sintering (SLS) of Pre-Coated Sands for Shell Mouldingp. 545
Reverse Engineering: from Computer Tomography to Rapid Prototypingp. 557
Application of Rapid Tooling for Sheet Metal Formingp. 565
Experiences in Rapid Prototyping: Voice Devices for Patients who have Undergone Total Laringectomyp. 573
Parametric Investigation of Sheet Laser Bending by Experimental and Numerical Analysisp. 583
A Technological Approach for Selective Laser Sinteringp. 591
Optimization of the Process of Laser Cutting of Steelp. 603
A Study on the Correlations Between Machining Parameters and Specimen Quality in WEDMp. 611
Residual Stresses After Laser Surface Remeltingp. 619
Surface Strengthening by Water Jet Peeningp. 627
Robust PID Controller for Continuos Casting Mold Level Controlp. 635
Automatic Alignment of Workpieces for Robotic Manipulation Using a Conveyor Belt and Fixed Flat Fencesp. 643
A Convergent Algorithm for L2 Optimal MIMO Model Reductionp. 651
Analytical Determination of the Position Loop Gain for CNC Machine Toolsp. 659
Computer Aided Tolerance Chartingp. 667
A Data Acquisition System to Monitor and Improve the Pinch and Roll Process of Compressor Blade Manufacturep. 677
The Harmonic Fitting Approach for CMM Measurements Optimizationp. 687
Vision System Calibration and Sub-Pixel Measurement of Mechanical Partsp. 695
Analysis of the Accuracy of the CAD Model Reconstruction of Spiral Bevel Gears by CMM's Digitisationp. 703
On a Methodology for Plasma Sprayed Ceramic Coatings Microhardness Measurementp. 711
Principles of Torque Measurements for Rotating Microsystemsp. 721
Low-Cost Visual Control For Handling and Assembly of Microsystemsp. 729
Stability Analysis of Rotating Discs: the Circular Saw Casep. 737
On the Pressure Distribution at the Contact Between Small End of a Conrod and Gudgeon Pinp. 745
Fatigue in Hard Metals and Cermets - an Important Damage Process in Tool Life Limitingp. 753
Residual Stresses after Induction Surface Hardening and Grindingp. 763
Micro-Dynamic Behaviour of as Nanometer Positioning Systemp. 771
Employment of Fuzzy Logic Modelling in Quenching of Steel Rods for Reinforced Concrete after Hot Rollingp. 781
High Precision Rotation Mechanism Based on Cross-Spring Pivots: Mathematical Modelling and Laser Triangulation Measurementsp. 791
End-Of Life Evaluation of Productsp. 799
A Method for Estimating the Profitability of a Product Disassembly Operationp. 807
Establishing the Ecodesign Strategyp. 815
Quality Improvement and Design of Experiments: an Industrial Applicationp. 825
Quality Methods for Design of Experimentsp. 833
Dynamic Inspection Policy in Manufacturing Systems Subjected to Linear Wear Processp. 843
An SPC Approach to the Analysis of Process Capabilities of a Flexible Manufacturing Systemp. 851
Partial Mixed Effects Split-Plot Design under Unknown Spatial Dependencep. 859
Some Comments about Run Orders in Performing Two-Level Factorial Designsp. 867
Statistical Economic Design of an X Control Chartp. 875
Influencing Factors and Case Studies in Design for Quality Manufacturabilityp. 883
Virtual Learning Environment Based on Advanced Information Technologies: a New Approach Toward Human Empowerment for Total Qualityp. 891
Author Indexp. 903
Table of Contents provided by Blackwell. All Rights Reserved.

ISBN: 9783211831489
ISBN-10: 3211831487
Series: CISM International Centre for Mechanical Sciences
Audience: General
Format: Paperback
Language: English
Number Of Pages: 906
Country of Publication: AT
Dimensions (cm): 24.41 x 16.99  x 4.67
Weight (kg): 1.45

Earn 441 Qantas Points
on this Book